New radiators, modern boiler, smart controls and all the pipework done right — a heating system that warms every room evenly and runs for 15+ years.
Some rooms freezing, others sweltering — system zoned by accident.
Old gravity-fed system can't keep up with modern usage.
Quote for a "full system" that didn't actually include the radiators.
Worried about ripping up floors and being without heat for a week.
We measure every room's heat loss — windows, walls, ceilings, floors — using the EN12831 standard. Radiators sized to actual demand, not bedroom count.
Boiler model, radiator sizes per room, pipework diameter, controls, valves, filters — all itemised before you commit.
Most full systems installed in 3–5 days, with heat and hot water restored every evening so you're never freezing overnight.
Floorboards lifted carefully and re-laid, walls chased only where unavoidable, and exposed pipework boxed in cleanly where it can't be hidden.
System chemically dosed, magnetic filter fitted, every radiator individually balanced, and a full handover document with warranty paperwork.
We calculate heat loss room-by-room — so the lounge isn't roasting while the bedroom stays cold. No guesswork.
Modern condensing boilers and high-flow systems need correctly sized pipework. We upgrade where the legacy 15mm runs are throttling performance.
Multi-zone Hive, Nest or tado° setups with per-room control where it makes sense — and proper geofencing for unoccupied savings.
Every system protected from sludge from day one with a magnetic filter and correctly dosed inhibitor — preserves boiler warranty.
On Viessmann installs registered through our accredited installer account.
Even mid-install, you won't go a night without heating or hot water — we rephase to keep the home livable.
Book any boiler repair this month and we'll include our 21-point health check at no extra cost.
Three failures account for most poor-performing UK heating systems: undersized radiators chosen by guesswork; pipework left at 15mm when the boiler needs 22mm flow; and no balancing — meaning the closest radiators steal flow from the furthest. We address all three by design.
Combi: best for 1–2 bath homes with strong mains pressure. System (with unvented cylinder): right for 2+ baths or larger families wanting mains-pressure showers from every tap. Regular (with vented tanks): typically retained only when loft tank space and traditional plumbing are preferred.
Properly installed and serviced: boiler 12–15 years, pressed steel radiators 20+ years, copper pipework 50+ years. Skip the magnetic filter and annual servicing and you can halve every one of those numbers.
Same trusted engineer, same fixed pricing — wherever you are in our coverage area.
Local. Gas Safe. Available 24/7. Get a fast, no-obligation quote — most enquiries answered the same day.
